Server case + rails + controller card + hard drives

Server case + rails + controller card + hard drives Introduction

I'm selling the following as a package. I will not part anything out. Chenbro NR40700 48 bay server chassis 4 820W hot swap power supplies (2 + 1 +1 redundancy) SAS2 backplanes (6GB/s) Rails for the chassis LSI 9300-8i HBA controller 2 SFF-8643 to SFF-8087 cables to connect to the backplane 17 4TB drives 9 SAS drives 8 SATA drives The chassis runs on 120v! it doesn't need a 240v circuit (WOO!). The chassis is not in mint condition. The front panel is in good shape. The rest of the chassis is great. I have all the caddies, including the two rear 2.5" ones. All PSUs are in working condition. There is a brass motherboard mounting screw that should be replaced (was rough coarse threaded it works, but won't be able to use fine thread screws like the rest of the motherboard). The specs for the chassis can be found here: https://www.chenbro.com/en-global/products/RackmountChassis/4U_Chassis/NR40700 . This is a long chassis, so if you're going to rack it, make sure the rack is deep enough. I replaced the Dynatron fans when I first got this with some arctic cooling ones, I didn't like the jet engine sound behind me. I don't have the original fans anymore. I know this HBA controller works with this backplane, so I'm including it along with the connectors. The hard drives are also fine with no errors. They are not under any warranty anymore. I don't have the SMART specs for them, and I'm not going to look for them. Power time for the drives should be under 10,000 hours, easy. Cash only. Pick up only.